OLI’s software can be used to simulate virtually any aqueous-based chemistry application.
Typical applications of OLI software include:
Environmental Process Simulation
Steady-state and dynamic flowsheet simulation
Wastewater treatment facilities
Steam stripping of priority pollutants
Removal systems for Total Reduced Sulfur (TRS) gases
Removal of metals from refinery effluent streams
Incinerator gas scrubbing
Chlorine scrubbers
Sour gas stripping
pH neutralization of process wastewater
Biological wastewater treatment
Desalination with reverse-osmosis and electrodialysis
Natural Environment
Chemical fate studies in deep well injection
Coprecipitation of radioactive materials (NORM and manmade)
Total dissolved solids (TDS) reduction in industrial ponds
Groundwater remediation systems
Heavy metal coprecipitation in natural systems
Energy and Mineral Production
Scale formation in oil and geothermal wells
Prediction of freezing and crystallization points in brines
Influences of chemical interactions in enhanced oil recovery
Scale inhibitor squeeze studies
Design of acid quench systems to remove trace contaminants
Water recycle options analysis
Corrosion prediction and control
Chemical Process Simulation
Steady-state and dynamic flowsheet simulation
Use of chemical additives to inhibit corrosion
Optimization of ammonia plant condensate stripper
Phase equilibria in chloro-alkali plants
Separation by ion-exchange chromatography
Oxidation-Reduction chemistry for aqueous systems
Electrolyte chemistry
pH titration curves for complex mixtures and controller models
Water softening system design